Miracle Coat International

About Us | Contact Us

education servicesproject/commerce servicesmarketing/internet servicesthe icf monitor
 
ICF Talk
Learning Center
Articles
Construction Financing NEW!

Interior finish
Contents
  1. Overlaying ICFs onto existing frame plans
  2. Changing wall lengths and opening positions to match ICF break points
  3. Picking the crew
  4. Site Preparation
  5. Making bucks
  6. Setting the first course
  7. Corner braces
  8. Stacking sequence
  9. Setting vertical rebar
  10. Aligning and plumbing walls
  11. Holding down forms against floating
  12. Building a floor deck
  13. Concrete placement equipment
  14. Pour pattern
  15. Pouring a gable end
  16. Consolidating concrete
  17. Attaching roof members
  18. Attaching interior walls to ICF walls
  19. Making electrical cutouts
  20. Interior finish
  21. Attaching trim and fixtures
  22. Exterior stucco
  23. Attaching exterior siding
  24. Miscellaneous
Commonly used methods
  • Method 1: Screw wallboard to form's fastenting surfaces
cm20-1.gif (6479 bytes)
  • Method 2: Glue wallboard to foam

  • Method 3: Use wire mest and plaster directly over the foam
Submit Your Comments
Name
Organization
Category
Phone
E-mail

Your suggestions or comments:

 

ICFweb is part of the BuildCentral Network | Contact BuildCentral
 © 2001-2005 BuildCentral, Inc. All Rights Reserved.
buildcentral.com